| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-20-2009, 12:40 PM
| |||
| |||
I just inherited a Tree 325, with a cimworks dnc port. The dnc port is still connected to the 25 pin connector, but the wire from the dnc port to the pc was just cut. I have no manuals telling me anything about the wiring or set up as far as baud rate etc. The cable from the dnc to the pc is a nine pin on both ends, And appears to have only have 4 wires connected in the past. Any help with wiring etc. would be a great help.....thanks in advance Jim Walker  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Looking for Dynapath System 10 parts (Bendix). | ions82 | Want To Buy...Need help! | 1 | 09-28-2009 12:28 AM |
| Looking for Dynapath System 10 parts (Bendix). | ions82 | Tree | 0 | 05-21-2009 01:01 PM |
| Need Help!- Bendix Dynapath 10 documentation needed | JerryJonz | Controller & Computer Solutions | 5 | 11-28-2008 12:07 PM |
| Bendix dynapath 10AM, What have I gotten myself into? | karbunkle1952 | General CNC (Mill and Lathe) Control Software (NC) | 11 | 03-03-2008 07:55 PM |
| Bendix clutch | Chubs | Jet Engines and Ram Jets | 9 | 10-02-2007 11:02 PM |
| | |
Linear Mode
