| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-15-2009, 11:38 PM
| |||
| |||
Hi Guys, Can anyone help me with the following? I have a Makino 55e and it just stopped!!!! with the following alarm: ALARM: 13063 MSG: A FILTER IN OILMATIC GET CLOGGED DI SIGNAL LS173 WENT OFF ************************* The machine will not run and no movement with this error. I replaced all filters and coolant and then after 6-7 hrs working it once again just stopped with that error. Anyone had a similar expereince or can give us some direction as to what is happening??   |
|
#2
07-18-2009, 07:15 PM
| |||
| |||
| get out the schematic , find ls173. see if it is giving the correct sig or not , maybe the sw is bad. |
|
#3
07-20-2009, 11:34 PM
| |||
| |||
| Looks like the spindle oil has coolant in it - why would this be happening ? i drain and flushed the spindle oil tank and system completely and after 20 hrs the alarms triggered and upon inspetion of the spindle oil it has coolant in it??? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem- M Plus Alarms | MJMark | Mazak, Mitsubishi, Mazatrol | 3 | 07-29-2008 03:39 PM |
| #105 & #163 alarms | Greg 24 | Haas Mills | 2 | 06-17-2008 04:54 PM |
| ALARMS 250 and 251 | Geof | Haas Lathes | 5 | 02-15-2008 09:32 AM |
| | |
Linear Mode
