Need Help! - Automatic Tool Changer

[mattjames]

Recently bought a router from china uses a lnc 510i controller problem is i can't get it tool move to the right tool location no matter how i input the command in MDI mode e.g. M06 T05 still goes to tool position 2 it does this for all the tool numbers this is the begining of the tool change code:
/*O9001 TOOL CHANGE MACRO O9001 */
@1=$1 /*RECORD G GROUP 01 STATUS G00, G01, G02 OR G03*/
@3=$3 /*RECORD G GROUP 03 STATUS G90 OR G91*/
@4=$15 /**/
@467=$230 /*RECORD X AXIS MACHINE COORDINATE */
@468=$231 /*RECORD Y AXIS MACHINE COORDINATE */
@469=$232 /*RECORD Z AXIS MACHINE COORDINATE */
@5=#20 /*RECORD T CODE */
T#20 /*READ T CODE */
IF [$200==1] GOTO 600 /*SPINDLE TOOL = COMMAND TOOL */

IF [$210==0] GOTO 10 /*C110=1 COOLANT MOTOR ON , RECORD COOLANT STATS . C110=1*/
@8=1

N10
M09 /*COOLANT OFF */
M05 /*SPINDLE STOP */
G4X6
M92
G90G0G53Z@450 /*Z AXIS G0 TO TOOL CHANGE POSITION */

IF [$201==1] GOTO 310
IF [$202==1] GOTO 320
IF [$203==1] GOTO 330
IF [$204==1] GOTO 340
IF [$205==1] GOTO 350
IF [$206==1] GOTO 360
IF [$207==1] GOTO 370
IF [$208==1] GOTO 380


The controler always goes to line 320 no matter what any help would be appreciated :-)

[Torsten]

Looks like a lot of the code is missing here.
Did you just post a partial macro?
Maybe if we see the entire macro someone could figure it out.

[joblo]

I had a similar problem with my LNC510i controller, where it often tried to put the tool back in the wrong tool holder. I think I have fixed that now by inserting this line;

$602=1 /*Tool change finished, pls advise LADDER for making Spindle tool number record to D */

I had some help from the LNC support people and they were very helpful.
What sort of machine have you got and who did you get it from in china.
My machine is a router from GA.hawk.