| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-18-2009, 09:15 AM
| |||
| |||
We are getting an intermittent machine alarm on our BND42-TR Miyano Lathe. The LEDs on the Fuji Electric amplifier indicate a CT error or Circuit Trouble. I've been trying to locate a manual for this amplifier on the web, but am not having much luck. The amplifier is a RYG.50HA-RP. Don't know if it's an internal circuit problem with the amplifier or is related to the encoder cable?? Anyone have a manual for this amplifier?  |
|
#2
10-28-2009, 04:22 PM
| |||
| |||
Hi dear users... i have a Miyano Lathe with some problem like the problem in this post but my Alarm is different. i received Machine Alarm LED on, The LEDs on the Fuji Electric amplifier indicate 1.-OP (letter O) or (number 0) Over Heat. (MOT) when i pushed the reset button, the alarm goes off. Then the machine work ok, but when i need turn off the machine and Turn on again, the alarm is ON again, does anybody know something about. Thanks in advance. Regards. Felipe from Cancun Mexico Last edited by Tolesh; 10-29-2009 at 01:13 PM. Reason: Adding pictures |
|
| Tags |
| alarm, fuji, lathe, miyano |
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- miyano bnc 34 nc alarm reset over travel | Progress Nc | General CNC (Mill and Lathe) Control Software (NC) | 6 | 05-02-2012 12:56 PM |
| miyano 3bc lathe info | dt38k | CNC Swiss Screw Machines | 0 | 05-13-2009 11:24 AM |
| Need Help!- Look for Miyano lathe BNE-26S parameter | Jung | Fanuc | 0 | 04-16-2009 11:20 AM |
| Need some guidence with 6t on a Miyano Lathe | blakemachine | Fanuc | 16 | 02-09-2009 08:15 AM |
| Need Help!- Miyano JNC-35 Lathe Parameters | MildBill | General Metal Working Machines | 1 | 12-18-2008 09:22 AM |
| | |
Miyano Lathe Machine Alarm 
Linear Mode
