Problem- lost parameter 900 to 930 fanuc otd sml20

[ticas1977]

i lost my parameter 900 and the machine dont work

machine

yang sml20
fanuc 0-td


please help me

[ticas1977]

can help

my cnc
yang SML20
fanuc o-td

mistakenly reset the parameters of the machine, I have a backup of the parameters, but does not contain 900 to 939, can provide these parameters,

thank you very much
Oscar Gutierrez de Velasco

[sudhirudar]

If use still need the parameters. please mail me at sudhirudar@yahoo.com
Please sepecify if you have turret of quick change

[stevo1]

These are the Fanuc option parameters that you are missing. You have a few things to try.
1. Contact the MTB if they are still in business and they should have the original settings for you.
2. Contact Fanuc and give them the serial number of the control and they might have the original settings for you.
3. Check the power cabinet for a hard copy of the settings. The MTB usually puts a hard copy in there for this particular reason however these are usually the first thing to disappear from the machine.
4. Start a thread in the Fanuc forum here at the zone. You might get a better response.

Stevo