| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-27-2009, 03:15 PM
| |||
| |||
hi all i have a problem in machine home point , when i press home push button while machine is stop in any point , machime didn't go to home point correctly in X axis and Y axis... just move short distance in this axis and stop and machine coordinate became X0 Y0 Z0 . but this place not the spicific place for home point . you know the most of CNC machine , home point in the left bottom machine work ... now machine define the point it already stop in there as machine home point . this happend when i press home push button in this position . pls. advise  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Home Built Edm Machine | sanjiv | EDM Machines | 132 | 08-07-2011 05:47 AM |
| Home made encapsulating machine? | tybrenis | CNCzone Club House | 10 | 01-15-2007 04:04 PM |
| home problem with mach 3 | Bill Wann | Machines running Mach Software | 1 | 07-28-2006 10:04 PM |
| Mach3 limit switch problem on Ref Home | originator | Mach Software (ArtSoft software) | 1 | 03-13-2006 08:02 AM |
| | |
Linear Mode
