Need Help!- Matsuura 600VF

[MadMan5000]

I have run 2 different programs yesterday and on bouth when I get to the last tool 6 lines before the end it gives me a 0322 G35 error. The programs are writen the same as all the others I have been running. Whats the problim???

[dcoupar]

Why not post the last 10 or so lines of your program and tell us what control your machine has.

[MadMan5000]

YASNAC:

G1Z-.07F8.56
G41D62X-.1762Y-.5357F3.75
G3X-.145Y-.45R.1333
G2I.145
X-.1365Y-.401R.145
G3X-.1325Y-.3782R.0667
G1G40X-.1328Y-.3115
G0Z1.
M5
G0M9
G53G49Z0H0M19
G53Y0
G90
M30


The guy before me changed the post to do this:
G53G49Z0H0M19
G53Y0

I ma just going to have to figure out how to change it back to:
G91G28Z0M19
G28Y0
G90

[dcoupar]

What control?

[MadMan5000]

I don't really know all it says on the controller is YASNAC. The machine is a MATSSURA 600VF.
I am working with verry old equipment. The Maynos are are CNC 7BC, I like to call them 7 Before Christ.

[dcoupar]

My manual doesn't have an explanation for alarm 0322. It also doesn't show a G35 in the G-code table. Are you sure it was a G35 error?

Also, I may be wrong, but I don't think you can have a G53 and a G49 in the same block.

[MadMan5000]

OOOOOPS it is G53 sorry.

But like I said earlyer I ma just going to try to change my post in MC9 I don't understand the use of G53 or why he would change it like that.

Allen

[nakatome]

i'm not a programer but here is the alarm contents

and a g53 example

[nakatome]

i think you may have an I 80 control
my other scan seemto be a problem