DSP controller software

[excav]

Don't know if anyone can help, but worth ago with all the wealth of individuals on these forums.

I have taken delivery of a cnc router from china.
To send A toolpath from the computer to the router it has to be downloaded via a usb cable into a hand held DSP Controller, which then sends it to the machine by a serial cable.

My problem is with the software (zhbusbconnect) which takes the toolpath which has been created already, from its location on the computer to the dsp controller.

I can open the toolpath with this program (zhbusbconnect) and actually view the toolpath on the screen, but at the top of the screen were you normally see the toolbars located there is nothing, not even the "File" and "Edit " buttons, so therefore I cannot execute any commands or upload the toolpath to the dsp controller.

Now I am assuming that this particuler software might be corrupted, and am wondering if any body would know of any other software ( or another copy of the same software) that would do a similer job.

And no the chinese company I bought it of don't seem to want to reply to my messages.
I am quite happy with the actual router and the controller does allow me to operate the router , its just the issue with the uploading of the toolpath.

Thanks for any responce,

[crayner]

Is there a way to change resolutions on your screen? You might try a few different settings - crappy software engineers sometimes do not think things through all the way when they impliment their software - for all you know the screen display software module may have been originally written for a children's toy, ending up in someone's software toolbox - they change jobs and take it with them figuring it's a snippet of code they won't need to re-write...
crayner
(ex-crappy software engineer)

[sanjiv]

for how much u had purchased

[excav]

Thanks crayner,
Yeah tryed that but no differance, its just frustrating that I can view all the various toolpaths I have ready in the software but I can't do anything else.

[rgammage]

Hello

Does this software make a disk icon appear under 'My Computer' or Windows Explorer'? Several utilities, like those for digital cameras, just appear as another disk in the list which you can copy to and fro ..... is this the case?

Regards

Richard

[unterhaus]

Is it possible that it's not recognizing your hardware, and the software breaks as a result? I've been working with some really crummy software, and things like that don't suprise me any more.

[excav]

Hi rgammage,
No it doesnt do that.

unterhaus,
Possibly, I just think the software is corrupt.

Thanks for the replys and suggestions

[unterhaus]

When you plugged the usb in the first time did it tell you it found new hardware?

[excav]

Yes it did, and then went on to find the software and install it

[alolabi]

Dear Mr

Just Insert this file in the same folder with the program and delete the same extintion type old file .

But it's not full work I tell the company about that and they didn't teel me what i do

[excav]

Hi Alolabi,

Thanks for the file and your help, but I have converted the machine to run with Mach 3 software.

Thanks for your help anyway.

[alolabi]

Hi excav

Please Teel me what you do Becuse my machine dont work

and if you can send for me label for english language
for my E-mail : alolabi@scs-net.org

Best Regard