| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-01-2006, 07:47 AM
| |||
| |||
Help! I recently purchased a Benchman 5000 built by Light Corporation. The unit booted up and ran about a half hour before the hard drive crashed. Didn't get a chance to run the motors just looking though all the software windows. Does anyone have the Acramatic 2100 software or should I just convert the machine to Mach software. Jeff  |
|
#2
10-02-2006, 01:09 AM
| |||
| |||
| I have one of these machines- mine works mostly. Its not simple to copy the software- Acramatic 2100. I can try to help. jwet@mindspring.com |
|
#3
11-17-2006, 12:38 PM
| |||
| |||
| We have a Cincinnati Falcon 300 lathe with Acramatic 2100 controls. Depending on what files are bad and how much of the drive is readable, I've had decent success recovering the drive and cloning it to a spare drive once operational. Otherwise I'd suggest sending the hard drive to Ontrack for recovery (www.ontrack.com). |
|
#4
11-18-2006, 11:38 AM
| |||
| |||
| Thanks for the info. I swapped hard drives the other day and the unit still didn't boot up, I'm beginning to wonder about motherboard or CPU. Anyway Ontrack is a good idea. Thanks, Jeff |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
