| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-03-2006, 05:09 PM
| |||
| |||
I have a 1986 cnc Lablonde makino lathe with a fanuc 3t control. It has siemens drives. When I power up it blows the two 8 amp fuses on the drive board. I get an error message 10. I can't enable the drives. The machines were made by gildemiester I think. Does anyone have any experience with these?  |
|
#3
02-27-2006, 07:38 PM
| ||||
| ||||
| If these are SCR drives, see if you can get a local electronics shop to test the SCR's for shorted condition, if they are and you can find replacements, it may be worth a try. What size motors are they? Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Siemens drive problem 
Linear Mode
