| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Machine Problems, Solutions , Wireless DNC, serial port Need help with your Machine or need a Machining solutions for , Serial Port, Cable problems between PC and all others DNC problems disucss them here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-02-2011, 10:41 AM
| |||
| |||
Hi I'm having some trouble to set my home made CNC working with the Home Switch at this moment, only my Z is working fine here a screen when I push to the Z: http://img710.imageshack.us/img710/2276/mach3z.jpg as you can see from the TOP I have a GREEN square for the Z but not for they other Axe what does it mean? also the pin in the middle right turn ON when I'm pushing at the switch the X and Y isn't working, even If I push or release here is the config of the inputs: http://img819.imageshack.us/img819/6518/mach3inputs.jpg If any idea came please let me know thanks, Q.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- 1 or 2 switch z home axis with thc and mach3? | sax | CNC Plasma and Waterjet Machines | 0 | 12-21-2010 08:22 AM |
| Mach3 limit switch problem on Ref Home | originator | Mach Software (ArtSoft software) | 1 | 03-13-2006 08:02 AM |
| limit switch and home switch setup | Runner4404spd | General Electronics Discussion | 0 | 12-15-2005 07:58 AM |
| Limit Switch / Home Switch in Software | Sanghera | General Electronics Discussion | 6 | 11-01-2004 05:58 PM |
| | |
Linear Mode
