Results 1 to 5 of 5

Thread: Niigata Hn63c Cnc

  1. #1
    Registered
    Join Date
    Apr 2005
    Location
    US
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Niigata Hn63c Cnc

    Hi Im New To This Forum And Im In Need Of Some Help. I Have 4 Makino Cnc Machines With Different Funuc Controls. This New Niigata (1995) With A Funuc 15 Controler. The Problem Is When The Machine Is Turned On We Have A Z Axis Interlock Alarm And A Spg Alarm. Im Looking For Some Help On This Newer Machine We Just Got It On Friday And Wired Up. But We Cant Zero The Z, Or The X Axis. The Z Does Not Move. Looking For Some Help On This Machine Things Are A Little Different On This Machine Compaired To Are Makinos. Thank You For Your Time And Help
    Tim
    Ps If You Need Help Or Advice On Makinos Let Me Know.

    Similar Threads:


  2. #2
    Gold Member
    Join Date
    Dec 2004
    Location
    Newtown, CT, USA
    Posts
    522
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by timatmmcc
    Hi Im New To This Forum And Im In Need Of Some Help. I Have 4 Makino Cnc Machines With Different Funuc Controls. This New Niigata (1995) With A Funuc 15 Controler. The Problem Is When The Machine Is Turned On We Have A Z Axis Interlock Alarm And A Spg Alarm. Im Looking For Some Help On This Newer Machine We Just Got It On Friday And Wired Up. But We Cant Zero The Z, Or The X Axis. The Z Does Not Move. Looking For Some Help On This Machine Things Are A Little Different On This Machine Compaired To Are Makinos. Thank You For Your Time And Help
    Tim
    Ps If You Need Help Or Advice On Makinos Let Me Know.
    hAVE yOU nOTICED tHAT yOUR kEYBOARD iS bACKWARDS fROM eVERYONE eLSE'S? It make your postings very hard to read.

    Ken

    Kenneth Lerman
    55 Main Street
    Newtown, CT 06470


  3. #3
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    20735
    Downloads
    0
    Uploads
    0

    Default

    There were a few different varietys of Servo Amplifier fitted to the 15, what model do you have?
    Al

    CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  4. #4
    Registered
    Join Date
    Apr 2005
    Location
    US
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default niigata

    the controler is a 15m funuc



  5. #5
    Registered
    Join Date
    Oct 2007
    Location
    usa
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default x and z locked up.

    I think the tool changer is not at home postion. This will prohibit x and z from moving. You will need to go to custom page and get everything back to home postion. I have 2 hn63c's.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed