Problem with serial communication between nvum4-sp and lcd


Results 1 to 1 of 1

Thread: Problem with serial communication between nvum4-sp and lcd

  1. #1
    Registered
    Join Date
    Oct 2016
    Location
    Czech Republic
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Problem with serial communication between nvum4-sp and lcd

    Hello, I apologize for my english. Is there somebody who know communication protocol in novusun nvum4-sp. I have mpg but one doesnt have lcd. I would like connect lcd (I know I need microprocessor, its not problem I work with microchip or arduino) but I dont know the meaning of each bytes. Maybe its the same in other mpges?? Does anybody knows these protocols and would explain it me?? I use mach 3 and nvum4-sp.
    Thanksfor answer with regards marek

    Similar Threads:
    Last edited by mlike; 01-22-2018 at 05:17 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with serial communication between nvum4-sp and lcd

Problem with serial communication between nvum4-sp and lcd