WERE DO I START NEW TO CNC


Results 1 to 2 of 2

Thread: WERE DO I START NEW TO CNC

  1. #1
    Registered howie43's Avatar
    Join Date
    Oct 2017
    Location
    United Kingdom
    Posts
    5
    Downloads
    0
    Uploads
    0

    Red face WERE DO I START NEW TO CNC

    ACQUIRED RAMBO 5V CTEK CONTROLLER WITH FLOPPY DISC DRIVE CAN I USE RS232 PORT CONNECTED TO COMPUTER PC AND HOW DO I DO THIS WHAT IS 2.5 D AS APPOSED TO 3D HOW DOES THIS AFFECT ME AND DOES 2,5 AXIS RUN 3 AXIS

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2006
    Location
    india
    Posts
    1792
    Downloads
    0
    Uploads
    0

    Default Re: WERE DO I START NEW TO CNC

    In a 3-axis machine, all three ares are controlled simultaneously.
    In a 2.5-axis machine, simultaneous control is not possible. XY motion can be given at different Z levels. While Z is changing, XY cannot be changed. Since it is neither 2-axis nor 3-axis machine, it is called 2.5-axis machine.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

WERE DO I START NEW TO CNC

WERE DO I START NEW TO CNC