TNC145 Serial cable help.

[steviegardiner]

Hi Guys,

Thanks for looking firstly, ive got a tnc145 controller with a serial cable ive made myself, I can transfer data from the controller to tnserver on the laptop perfectly, but I cant transfer it back to the controller, I'm using 2400 baud, 7 bits, 1 stop, even parity, no flow control, and the buffer is off.

I'm also getting no errors on the tnc145 and when I hit the ext key it shows correctly, and the tnserver sends the data no problem, it just doesn't show on the crt.

Many thanks again and look forward to your reply's.

Steve.

Similar Threads:

• Need Help!- Heidenhain TNC145 serial connection cable
• Need Help!- Serial Cable
• Pin out of the serial cable??!
• cat 5 cable for serial?
• Serial cable help

[ChrisNexas]

Sounds like a Handshake issue.. are you still having the issue ?

[brusic]

Hi Guys,

Thanks for looking firstly, ive got a tnc145 controller with a serial cable ive made myself, I can transfer data from the controller to tnserver on the laptop perfectly, but I cant transfer it back to the controller, I'm using 2400 baud, 7 bits, 1 stop, even parity, no flow control, and the buffer is off.

I'm also getting no errors on the tnc145 and when I hit the ext key it shows correctly, and the tnserver sends the data no problem, it just doesn't show on the crt.

Many thanks again and look forward to your reply's.

Steve.

the program has to be completed with a square and will be displayed or uploaded again and displayed