Need Help! Communicating with Gerber Saber 408


Results 1 to 3 of 3

Thread: Communicating with Gerber Saber 408

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Communicating with Gerber Saber 408

    Hi Everyone,

    I've been tasked with bringing our old Gerber 408 into the modern age by converting it to accept G-Code posted from Mastercam 2017 but I've hit a snag. From my understanding, the Gerber normally functions as a plotter/printer, not a typical CNC router. I've gotten as far as posting a test program with a Gerber post supplied by our Mastercam dealer, but cannot send the program over to the Gerber. We uses CISCOEdit to send all out G-Code to our other machine, a 1999 Anderson EXXACT DUO, but I don't think it's possible to do it in the same manner for the Gerber. CISCOEdit transmits one line at a time, but I believe the file needs to be send as a whole entity for the Gerber to receive it. I'm currently connected via Serial port although I can't say with confidence if my settings are correct.

    Any guidance would be much appreciated.

    Thanks,

    Tanner.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2017
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Communicating with Gerber Saber 408

    Just going to update this in case anybody else runs into the same problem I was having.

    CIMCOEdit will transmit to the Gerber, it was just a matter of getting the settings right.

    Stop bits: 1
    Parity: Even
    Baud: 9600
    Data bits: 8

    Here's some sample code for anyone that tries to get a post working. This code cuts a perfect circle, a rectangle with square corners, and a square with a radius. It works decently well, although it does dwell momentarily at the beginning of the circle.

    Code:
    %
    (NEW MCAM GERBER TEST.NC)
    (TOOL -  1 |   1/2 STRAIGHT BIT             | DIA. - 0.5000)
    G20
    G00 G90
    T1 M06
    G00 G90 X3.9479 Y11.2037 S18000 M03
    Z2.75
    Z.85
    G01 Z.75 F100
    X4.0351 Y10.2075 Z0. F200
    G02 X4.037 Y10.1639 I-.4981 J-.0436
    G03 X7.287 Y6.9139 I3.25 J0.
    X10.537 Y10.1639 I0. J3.25
    X7.287 Y13.4139 I-3.25 J0.
    X4.037 Y10.1639 I0. J-3.25
    G02 X4.0351 Y10.1204 I-.5 J0.
    G01 X3.9479 Y9.1242 Z.75
    G00 Z2.
    Z2.75
    X19.6236 Y13.4759
    Z.85
    G01 Z.75 F100
    X18.6275 Y13.3887 Z0. F200
    G02 X18.5839 Y13.3868 I-.0436 J.4981
    G01 X14.5705
    G03 X14.3205 Y13.1368 I0. J-.25
    G01 Y7.3397
    G03 X14.5705 Y7.0897 I.25 J0.
    G01 X22.5973
    G03 X22.8473 Y7.3397 I0. J.25
    G01 Y13.1368
    G03 X22.5973 Y13.3868 I-.25 J0.
    G01 X18.5839
    G02 X18.5403 Y13.3887 I0. J.5
    G01 X17.5441 Y13.4759 Z.75
    G00 Z2.
    Z2.75
    X33.0287 Y14.422
    Z.85
    G01 Z.75 F100
    X32.0325 Y14.3348 Z0. F200
    G02 X31.9889 Y14.3329 I-.0436 J.4981
    G01 X29.9889
    G03 X28.7389 Y13.0829 I0. J-1.25
    G01 Y9.0829
    G03 X29.9889 Y7.8329 I1.25 J0.
    G01 X33.9889
    G03 X35.2389 Y9.0829 I0. J1.25
    G01 Y13.0829
    G03 X33.9889 Y14.3329 I-1.25 J0.
    G01 X31.9889
    G02 X31.9454 Y14.3348 I0. J.5
    G01 X30.9492 Y14.422 Z.75
    G00 Z2.75
    M05
    M30
    %




  3. #3
    Member marcusskriver's Avatar
    Join Date
    Oct 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Communicating with Gerber Saber 408

    Hey Tanner
    What post processor are you using to get g-code?
    regards
    Marcus



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Communicating with Gerber Saber 408

Communicating with Gerber Saber 408