TNC 410 program uploading problem


Results 1 to 2 of 2

Thread: TNC 410 program uploading problem

  1. #1
    Member
    Join Date
    Aug 2011
    Location
    Scotland
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default TNC 410 program uploading problem

    Hello.
    I am looking for some advice on program transfer between TNC 410 to PC via EXT port. We can send progs from TNC to PC no problem but cannot from PC to TNC. There are no alarms coming up, just no data transfer. All cables / equipment used have been proven on similar machine. Any thoughts welcome
    Dean

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: TNC 410 program uploading problem

    Do You have proper data format and header and file name and row numbering and so on.
    It's quite simple system and if there is some improper data it just doesn't see text for transfer.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TNC 410 program uploading problem

TNC 410 program uploading problem