Hello, We have the following problem with the above mentioned machine. First, I need to mention machine had been out of service for several years and, really don't know well it was maintained. The problem is, that after finally getting running, I noticed that when I close the cabinet door control side (right hand side) after while machine stop and, get an alarm. The alarm is random could be an axis over travel, spindle , etc... It is none of these. I open door, machine run all day without alarm. I checked all, the cables, wires, boards for a faulty contact. connection. loose, what so ever. Every thing ok. But, close the door, after awhile, alarm again. Thank you for any feed back on this.
Reply with Quote
Matsuura MC-500V w/ Yasnac MX1.
