Mori-Seiki SL-0 / Yasnac LX1 Alarm Code 332 Help!?!

[larrynsr]

Hi,

I am a new student learning CNC programming/machining. I am working with a Mori-Seiki SL-0 with the Yasnac LX1 controller. When I first powered it up, everything worked fine with no alarm codes. But the past two or three times I turn it on, it displays a Alarm Code 332 (Fuse Blown Z) and also Alarm Code 280 (Machine Unready). I called Yasnac and they told me to remove the servo board to see if the fuse LED is on (which it is). I then left the board unplugged and untouched for about a week. Then I came back and plugged it back it back in and the machine worked again with no alarm codes. But now when I turn the machine on, I get the same two alarm codes (332 and 280).

The voltage I am running the machine at is from 208v~214v. It has two buck type step down transformers.

Anybody have any idea what is going on?

Thank you for any help that you can provide.

Larry

Similar Threads:

• Mori Seiki SL2 With YASNAC
• Need Help!- Mori Seiki CL-20A YASNAC
• Need Help!- MORI SEIKI SL-3 YASNAC LX1 CONTROL ALARM 362
• Mori Seiki CL-20 Yasnac LX3 Alarm 330 & 310
• Mori Seiki MV45 Yasnac MX1 Help Please

[larrynsr]

can anybody help me?

[ROBBY 68]

Did you find the fuse phisically?
take it out.! and chech with meter, continuity you will find it is good (closed)
But I think you have a False contact on fuse base, it must have a pair of blue wires to send alarm status to the control, if fuse is good, then you can jumper wires and get rid of the alarm.
Hope it works
Robby

[pabobbys]

Hi Larrylsr,
Your problem is on the control card of the servopack.
If you are still having a problem let me know...
I can help you.
Simplersys@comcast.net