Results 1 to 2 of 2

Thread: HITACHI SEIKI HT25 TURRET ERROR

  1. #1
    Registered
    Join Date
    Nov 2011
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default HITACHI SEIKI HT25 TURRET ERROR

    Hello, Still scratching my head thinking about this turret error problem that has appeared and gone away over several days.

    Turret error is now terminal with no turrent movement. Can manually move turret.

    Check hydraulic pressure OK.

    Checked solenoids, all ok.

    Turret will not reset back into position and will now no turn.

    Secondary problem is an intermittant video. Switchs on, works all day without problem. Turn it off and several attempts required to turn it on again.

    Started pulling turret down and would muchly appreciate any advice.

    Thank you
    Steve Wotherspoon

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2011
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Seili HT25S TURRET ERROR

    Second problem seems to be a faulty connection and is fixed.

    Problem still remains with zero rotation turret.

    Tahnks
    Steve



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed