Results 1 to 3 of 3

Thread: What a great application!

  1. #1
    Registered
    Join Date
    Mar 2005
    Location
    US
    Posts
    67
    Downloads
    0
    Uploads
    0
    "If you have great talents, industry will improve them; if you have but moderate abilities, industry will supply their deficiency." *Sir Joshua Reynolds (1723 - 1792)


  2. #2
    Registered
    Join Date
    Jul 2003
    Location
    Sweden
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    I have tried it, Its ok but fantastic ;-)
    It has to do with the center of the machine.



  3. #3
    Registered drawbar's Avatar
    Join Date
    Apr 2004
    Location
    USA
    Posts
    90
    Downloads
    0
    Uploads
    0

    Default

    We have four Kuka robots in our plant. We use them to load and unload molding presses. They are the big KR-350's, but not quite as big as the ones for Robocoaster. They are VERY well made robots and they have one of the best teach pendants I've ever used. Don't ever drop one, though. Ouch, expensive.

    Brian



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed