Mach3 serial port problem... - CNCzone.com-The Largest Machinist Community on the net!

Jonne · #1 11-16-2007, 01:04 PM

What is problem when serial don't work?
Here is line:

Call sendserial(getselectedtool())

It seems to get stuck... Have anyone solution?

ger21 · #2 11-16-2007, 01:25 PM

Are you sure mach will let you get that info from the serial port? I'm not sure if it does.

Jonne · #3 11-16-2007, 01:56 PM

It doesn't matter what I send to serial port.
*Call SendSerial ("Hello")* doesn't work either...

Jonne · #4 11-16-2007, 01:59 PM

I update Mach to version 2.60, and now it doesn't get stuck anymore,
but theres nothing happening in serialport.
Mach's Serial monitor works OK,
but SendSerial sub is useless.

Jonne · #5 11-16-2007, 02:20 PM

I find solution... I Reinstall whole Mach3... That's help...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Serial Port Issues	Egar Twins	Machine Problems, Solutions , Wireless DNC, serial port	38	08-01-2011 02:25 AM
serial port	lamicron	Computers and Networking	9	12-18-2007 11:42 AM
Mach3 and serial port	HiaB	Mach Mill	0	09-30-2007 04:41 PM
USB to serial port	stampman	Machine Problems, Solutions , Wireless DNC, serial port	7	12-30-2006 02:17 PM
Fanuc 0T Serial port problem	a_greavu	Fanuc	3	10-12-2006 06:31 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)