| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-06-2011, 05:21 AM
| ||||
| ||||
Hello. My motor/screws is not good. One mm is not one mm.... I try to get in the motor tuning tab, but what do i change? I use gecko 540 with 10 microsteps and nema 23 425 oz in. 200 steps. Here is my axes: x-axis = ballscrew 5mm pitch y-axis = ballscrew 10mm pitch z-axis = ballscrew 10mm pitch Hope someone can help me. Greetings from Robert.
__________________ My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html  |
|
#2
03-06-2011, 06:00 AM
| ||||
| ||||
| X - 400steps/mm Y and Z - 200steps/mm
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Things not to do when setting up Mach3 ! | Larken | Viper Servo drives | 3 | 12-04-2010 03:41 PM |
| Threaded rods pitch size for mach3 | wf1318 | Machines running Mach Software | 2 | 07-02-2010 08:18 AM |
| New lead screws, setting EMC to them | g29cc | LinuxCNC (formerly EMC2) | 1 | 08-11-2009 05:03 PM |
| Basic Q's / Setting up Mach3 | Thorpydo | Mach Mill | 3 | 09-24-2008 07:25 PM |
| coarse pitch ball screws | endgrainguy | Linear and Rotary Motion | 2 | 05-08-2008 10:25 AM |
| | |
Setting up the pitch on the screws in mach3 
Linear Mode
