| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mach Software (ArtSoft software) Discuss Mach 1 , 2 and the new Mach3 here NC software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-24-2009, 09:15 AM
| |||
| |||
Hey folks, I have my relay controller connected to pin 17 and I have tried all the output signals which when setting the enable on will fire the relay but none will cycle torch on/off during the cutting cycle. In Mach 3, what output does the M3 and M5 actually control? I had it working at one time but I have had to reprofile severel times to solve other problems. I am running mach 3 on a probotix controller Update: After posting I went back to trying to figure it out and found the relay control output designation Under spindle control tab and that solved the problem. Last edited by jeremyrockjock; 12-24-2009 at 11:13 AM.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Plasma Cutter Fume Control | mconstrain | CNC Plasma and Waterjet Machines | 8 | 02-12-2009 08:47 AM |
| Help with CNC Plasma Control Please | Grobschmied | CNC Plasma and Waterjet Machines | 9 | 11-07-2008 01:27 AM |
| Need Help!- how do you control the plasma torch on/off | bekx | CNC Plasma and Waterjet Machines | 2 | 03-27-2008 09:47 AM |
| Plasma THC control ? | CNCadmin | Mach Plasma / Laser | 1 | 07-23-2007 02:57 PM |
| CNC plasma table with height control...? | Sperstad | CNC Plasma and Waterjet Machines | 3 | 06-27-2007 10:54 PM |
| | |
Linear Mode
