mach2 i can jog at a max speed of 30 ipm but it wont feed that high?

[mike10]

i can jog at 30 imp

if i right G1 x2. F25.

it only runs at 15 ipm (not the 25 ipm i ask for)

if i enter 10 ipm it will run at 10 ipm (like it should)

is there a max feed seting a havent found one

the rapid only run at 15 max also

[ger21]

You probably have your motor tuning set too low. That is what sets your max speed.