| | |
Would someone know how to manualy set the travel distance, since I have tried the auto Cal for X,Y,Z didn't work as it set the steps to 6400 and nothing moved.
I move the distance 1" and the software says 9" How would I fix this??
Currently it set to 1600/ 400/ 90
multiply steps/unit by 9.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
LinkBack URL
About LinkBacks
