Installing Mach on Winnt4.0

[Oscar F1]

I have some difficulties with installing Mach on winnt 4.0

Near the end of the installation de Installer says disk full
Unable to write.....

When I skip these files the installer gets to the end but Mach does not start.

Ofcourse there is space enough on the machine.

I used different releases of Mach 3 .
Also updated Winnt4.0 with service pack 6 for NT.

Anybody familiar with this problem?

[ger21]

Mach will NOT run on NT4.

It only works on Win2K, XP and Vista.

[gmfoster]

I have some difficulties with installing Mach on winnt 4.0

Near the end of the installation de Installer says disk full
Unable to write.....

When I skip these files the installer gets to the end but Mach does not start.

Of course there is space enough on the machine.

I used different releases of Mach 3 .
Also updated Winnt4.0 with service pack 6 for NT.

Anybody familiar with this problem?

Sure
Mach clearly states for Win 2000 or Win XP and also runs (?) on Vista..
No NT!