| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Mach Software (ArtSoft software) Discuss Mach 1 , 2 and the new Mach3 here NC software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-05-2007, 01:18 PM
| |||
| |||
Hi - In my gcode I have the following F50 G1 Z5.0 G1 Z0.0 Then continues with more junk...... When it starts it goes to +5 and never takes Z down to ZERO. If I put -5 it goes to -5 and not ZERO. If I put 0.001 it goes to 4.XX9 or something... Not ZERO. Anyone here have any ideas I can try or what to do? Thanks KH
__________________ Please check out my CNC blog http://cncinside.com  |
|
#2
05-05-2007, 04:19 PM
| ||||
| ||||
| Are you running in incremental (G91) mode or absolute (G90) mode?
__________________ First you get good, then you get fast. Then grouchiness sets in. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
05-05-2007, 06:06 PM
| |||
| |||
| I got a reply from Art - he said use G90 and seems to be ok now. Thanks
__________________ Please check out my CNC blog http://cncinside.com |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Boss 6 Axis Problem | DaveinUK | Bridgeport and Hardinge Mills | 2 | 02-21-2007 10:06 AM |
| Problem with Z axis | MagTDK | DIY-CNC Router Table Machines | 56 | 10-31-2006 08:12 PM |
| z axis problem | UMASSREHAB | TurboCNC | 1 | 09-29-2006 05:45 PM |
| Z-axis problem | Trainhound | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 12-14-2005 02:24 PM |
| | |
Linear Mode
