Works in KCam, Not working in Mach3

[Cooper]

Dear All,

I bought my cnc controller yesterday and i connect everything as in manual. The board works very well in Kcam (Kcam is explained in manual and i configured this program works very well). But i would like to buy Mach3 and so i need to configure it for Mach3. I took this ss from related softwares :

Mach3 : (Not Working)


KCam : (Works well)


So, what's the point? What is wrong with these configuration?

TIA

Cooper

[7ofclubs]

I got the same problem. I got a hobby cnc system, works fine in KCAM and TurboCNC but I can't get it to work in Mach3. I prefer Mach3 because I don't have to restart in DOS everytime I want to mill something.

-=7ofclubs=-

[7ofclubs]

Looking through the posts here on CNCZone I found a thread that will probably solve both our problems.

You can find the thread at:

Where am I going wrong with ports and pins setup?

-=7ofclubs=-