Mach3 0-5V to 12-24V ??

[jimmychand]

I want to change 0-5V from printer port to 12-24V to use for my servo drive. Anybody have idea how to do it? Thank in advance for your helps.

[Barker806]

Take a look here http://www.cncbuildingblocks.com/ele...interface.html

He has a board that can do it and he also has a board that can home to an index pulse...

Hope that helps
Brian

[SEC]

Originally Posted by jimmychand I want to change 0-5V from printer port to 12-24V to use for my servo drive. Anybody have idea how to do it? Thank in advance for your helps.

Hello . Everybody.
I am driving by the AC servo motor and the driver.
Easily, open collector's transistor array is used.
It is this easy easily and it is possible to use it.
Differential motion output 26LS31 that uses the line driver is used to keep rich.
For the reference though the link is Japanese
http://sec-suzuki.com/newpage205.htm

Though it is an automatic translation
http://nifty.amikai.com/AmiWeb?ami_u...583&ami_nojava

I hope this is paved then.