LinkBack URL
About LinkBacks
I use a 15" LCD, with 1024x768 being the maximum. If I had a larger monitor, I'd run a higher resolution.
| | |
As the title says, what screen size resolution are you using for Mach3 operation? Im interested what monitor display size you all are using! Eg. 800x600px, 1024x768px, 1366 x 768px, 1280x800px, or 1400x900px?
"I will not let you regret knowing me."
I use a 15" LCD, with 1024x768 being the maximum. If I had a larger monitor, I'd run a higher resolution.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Gerry, so where do you place your monitor? In an CNC enclosure or open air?
"I will not let you regret knowing me."
The pool would be better if it included all the commonly available monitor resolution.
For example 1280x1024 is the most common resolution for 4:3 aspect monitors in 17" and 19" sizes.
As this is not a choice, I can not supply an accurate vote.
Dave
Open air, but I keep it covered with a towel when not in use, to keep the dust off of it.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
1024x768; got an older touch screen unit (Advantech brand) off eBay. Apparently it's made for the medical field, it's pretty dust proof so it just sits in the open and gets cleaned once in a while.
It's networked with "my documents" shared so I can send code to it from any other system. Then just open Mach3 and go for it.
Edit: Hum... seems like I just replied to an old post... wonder why it comes up when clicking "New Posts" on top :/
Somebody just voted. That updates the thread date/time even though no new post has been added to the thread.Originally Posted by SirSmash
Bob
"Bad decisions make good stories."
Posting Permissions
| | |
