Cutting speed locked to Z torch height control speed - CNCzone.com-The Largest Machinist Community on the net!

Beefy · #1 02-08-2010, 05:55 PM

I have bought the MP3000 with digital torch height control from CandCNC. I built my floating Z-axis to have a max. speed of about 150 ipm (5mm leadscrew). As far as I understand Mach limits the speed to all axis to that of the slowest axis. Does this mean that my X & Y axis will only run at a max of 150 imp too.

Thanks,

Keith.

Torchhead · #2 02-14-2010, 05:14 PM

Answered in the Plasma Forum section of the list

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Torch Height Control	Rxe	CNC Plasma and Waterjet Machines	7	04-07-2010 06:09 AM
DIY torch height control	mjp	CNC Plasma and Waterjet Machines	34	12-20-2009 02:57 AM
Need better torch height control?	Karl_T	CNC Plasma and Waterjet Machines	4	04-27-2009 11:36 AM
Torch Height Control / Capacitive Height Control	ahlbebuck	Open Source Controller Boards	0	11-27-2006 01:32 PM
BPSeriesI / Centroid control- Spindle speed all out of whack with speed dial?	peter.blais	Bridgeport and Hardinge Mills	9	08-08-2006 03:29 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)