| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-13-2011, 12:25 PM
| |||
| |||
hi to all metal cutters, could or has anyone found a way to speed x and y axis faster, so say if plasma makes a cut at 700mm/min then jumps to 1500mm/min to move to the next cut and then goes back to 700mm/min to cut the next cut,, is that posible thanks again to all helping thoughts  |
|
#2
11-13-2011, 02:15 PM
| ||||
| ||||
| Increase the velocity in motor tuning. That's what controls your G0 speed between cuts. Provided your machine can handle the increase, of course.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
11-16-2011, 06:30 PM
| |||
| |||
| many thanks gur21 now works a treat cheers,, |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Mach 3 Speed Issue on four axis foam cutting setup!! | Domdonder | Foam Cutting Software | 2 | 09-12-2011 03:30 AM |
| change start point for multiple cutting operations | greenene | Mastercam | 2 | 08-15-2011 05:43 PM |
| FLY CUTTING SPEED | matchy | Haas Mills | 5 | 04-03-2010 11:50 AM |
| Cutting speed locked to Z torch height control speed | Beefy | Mach Plasma / Laser | 1 | 02-14-2010 05:14 PM |
| Is cutting speed limited to Z-axis speed | Beefy | CNC Plasma and Waterjet Machines | 4 | 02-13-2010 04:06 PM |
| | |
speed up axis between cutting operations 
Linear Mode
