LinkBack URL
About LinkBacks
What is your microstepping set to?
I am running the HobbyCNC PRO Driver Board with the 305oz steppers
also .75 acme screws with 6 per inch and I was wanting to get the setup right on the motor tuning on how many steps per inch.
He is the link to my CNC Router
http://www.ecosee.com/picturesnow@ec...0CNC%20Router/
Tell me what you think
Trell
What is your microstepping set to?
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
The Hobby Board is set to 1/2 step
2400 steps/unit
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hey, Now it cuts on the money
Thanks for the help
Did you look at my CNC
Trell
Posting Permissions
