| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
08-01-2009, 01:50 PM
| ||||
| ||||
| Set up the second as A, B, or C axis. Make sure all settings are the same (except pins). Go to Config > Slaving and assign the slaved axis to Y.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)  |
|
#4
08-03-2009, 12:42 PM
| ||||
| ||||
| You can use two ports.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#5
04-30-2011, 09:02 PM
| |||
| |||
| I got d same problem and my second motor still not working though already Config > Slaving and assign the slaved axis to Y. Anybody knows how to set d others with relevant of slaving d same axis. 4 ur info I'm using 4 axis TB6560 driver board. |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Mach3 A axis (4th axis) setup? | cadcamslawek | Mach Software (ArtSoft software) | 10 | 01-17-2012 08:23 PM |
| Z-axis setup/control in Mach3 | Richotech | Machines running Mach Software | 3 | 07-21-2009 08:50 PM |
| Mach3 R3.00 Mill 4 axis Foam cutter setup | Andy Smith | Mach Mill | 1 | 01-25-2008 07:19 AM |
| Featurecam Lathe Setup X axis MAch3 | whiteriver | FeatureCAM CAD/CAM | 0 | 02-20-2006 05:04 PM |
| | |
Linear Mode
