| | |
My Re-Set button in Mach3 will not work, I get a message "External E-Stop requested".
Can someone lead me to the correct place to re-configure?
Thanks,
gda
Ports and Pins, Input pins, toggle the Active Low setting of the EStop pin.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
LinkBack URL
About LinkBacks
