| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-24-2011, 11:30 AM
| |||
| |||
I have mach 3 and step and dir on the motor tuning page are 1, if I try to change them nothing happens as in I set them to 2 and 2 and save the axis and when I reopen motor tuning they are 1 and 1 again. The instructions for my xylotex controller are "DIR must be stable 200 nanoseconds before and after the rising edge of the STEP signal. The STEP signal should be valid for 2 microseconds (uS) or more" What should I do?  |
|
#2
01-24-2011, 04:26 PM
| ||||
| ||||
| type in 2 and click the "enter" key on your keyboard, then save the axis.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Loosing step more and more on X axis only after reducing the accl/velocity step motor | Calico | DIY-CNC Router Table Machines | 3 | 04-09-2010 07:23 PM |
| Need Help!- Step/Direction pins should be Step FWD and Step BACK | rayscott | Mach Software (ArtSoft software) | 6 | 02-09-2010 05:57 PM |
| Full step and half step hybrid driver? | rkremser | Stepper Motors and Drives | 4 | 11-20-2008 10:22 AM |
| Need Help!- How to edit MPFAN post file step by step | m_bhui | Post Processors for MC | 2 | 10-04-2008 05:42 AM |
| Step by step cnc plasma with parts list and links. | massajamesb | CNC Plasma and Waterjet Machines | 8 | 07-08-2007 10:22 PM |
| | |
Linear Mode
