LinkBack URL
About LinkBacks
Go to general config and make sure you have notepad configured as your editor. (or any other text editor)
| | |
hello,
i have the free demo of mach 3 on my lathe and it wont let me edit the program. but i have it on a diferrent computer that lets me edit. so what is the problem. thanx john
Go to general config and make sure you have notepad configured as your editor. (or any other text editor)
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
hey thanks, and that was the problem
Posting Permissions
| | |
