Need Help!- Where to find Mach3 turn .set layout file

[LTP]

Hey,
I am after the screen layout file for mach3 turn to import into 'machscreen' to customise it. I am able to find the Mach mill files but not turn. Also would anyone be able to help me with creating a button that I could push which calibrates the machine ie goes to both the z axis home switches and x home switches. This will be run at startup to ensure the machine is calibrated. I am using stepper motors therefore they have no encoder so if the machine is bumped whilst its off that could cause problems hence the calibrate button.

Many thanks,
Lachie

[ger21]

Turn files are .lset
Try 1024.lset

[LTP]

Thanks for that.
That has worked perfectly!
All I need to do now is develop a button with some code attached to calibrate the machine. Could you offer any guidance?

thanks

[ger21]

Download the manual for my new screen, and the last two pages have info on creating homing scripts. The CNC Woodworker - Mach3 2010
When you add the button, set it for VB script, and add the script in Mach3 using Operator > Edit Button Script.