Something like this:
If IsActive(Input1) then
DoOEMButton(1001)
Save as Macropump.m1s in the proper macro folder, and enable macropump in general config.
http://www.machsupport.com/wp-conten...o_Prog_Ref.pdf
Mach3Wiki
I need to write a Macro Pump ( I think) to monitor fluid flow from 2.2 KW water cooled spindle. ( I want to stop or pause machine if water flow is interrupted from the spindle). I have the circuit designed and constructed so that I get a True/False signal to one of the inputs of my BOB but I don't know how to use the info to stop the router.
The Artsoft tutorial is fairly limited and I was hoping some one can direct me to a better (more advanced) tutorial on using scripts and macros in Mach3. If not perhaps a kind person could tell me how to do it.
Similar Threads:
Something like this:
If IsActive(Input1) then
DoOEMButton(1001)
Save as Macropump.m1s in the proper macro folder, and enable macropump in general config.
http://www.machsupport.com/wp-conten...o_Prog_Ref.pdf
Mach3Wiki
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Your a gentleman and a scholar thank you very much. Exactly what I was looking for especially the macro referance
Cheers