I seem to recall that the probing plugin stopped working correctly many years ago. I don't think it's compatible with the newer versions of Mach3.
Hi all,
It's my first post and need some help.
I'm trying to use the probing plugin in mach3.
I have done many test but I always get "previous SEQ not yet complete"
it will move the x axis but not touch the part and stop and flash the message
"previous SEQ not yet complete"
And actually I do not understand why !
my probe is okay my paramters seems okay ...
Using windows 10 and the UC100
after each move ... I get this error message ? "previous SEQ not yet complete"
someone could explain me why ?
thanks in advance
Deon
Similar Threads:
I seem to recall that the probing plugin stopped working correctly many years ago. I don't think it's compatible with the newer versions of Mach3.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
you might want to give my probe routines a try they cover everything that you should need
http://www.cnczone.com/forums/mach-s...-routines.html
Thanks guys,
Squirrel do you have instructions for what I need to do? I'm kinda new at this.
Deon
Have you read the read me file in the .rar
If you have Skype I can walk you through it
It is pretty easy to set up and there are help screens when you start a probe.
Squirrel,
I downloaded the .rar file. What opens it to read the read me txt?
Sorry to ask
Thanks
Deon
Just unrar the file to a folder there is a read me .txt file in there
Just use note pad
winrar
Cool
Thank You
Deon