big-tex screen set laser crosshair setup HELP


Results 1 to 5 of 5

Thread: big-tex screen set laser crosshair setup HELP

  1. #1
    Registered
    Join Date
    Apr 2012
    Location
    USA
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default big-tex screen set laser crosshair setup HELP

    I have searched here and watched his videos. Looking to see how to wire this into the breakout board. Tweakies website mentions that the Bob can power this, I have outputs available (pin 14 for example outputs 5v). I'm at a stand still. Please help.

    Similar Threads:


  2. #2
    Registered Oldstairdog's Avatar
    Join Date
    May 2014
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: big-tex screen set laser crosshair setup HELP

    Goto your spindle tab on pins and port, look down and find the spot to "un check" disable flood relay, then look and see which output to use ,then go back to output tab and go down till you find that output and "check it" . Pick a pin from the list below. Make sure you save everything.
    I just order a relay to do the same thing, but I think the laser I ordered use 3Vdc. I will be using the 5vdc to trigger the relay.
    OSD
    ps. You have 6 outputs to use and a about ten pins, just make sure you keep track

    Last edited by Oldstairdog; 02-04-2015 at 07:46 PM. Reason: ps:


  3. #3
    Registered
    Join Date
    Apr 2012
    Location
    USA
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: big-tex screen set laser crosshair setup HELP

    Perfect, I'll give that one a shot also tonight. Thanks for the info on both issues.



  4. #4
    Registered Oldstairdog's Avatar
    Join Date
    May 2014
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: big-tex screen set laser crosshair setup HELP

    NO problem! I know how frustrating all this can get, being a "newb" myself.

    OSD



  5. #5
    Registered
    Join Date
    Apr 2012
    Location
    USA
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: big-tex screen set laser crosshair setup HELP

    This one worked out great. On to the tool zero.
    Thank you for your help.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

big-tex screen set laser crosshair setup HELP

big-tex screen set laser crosshair setup HELP