Not in Mach3, but I think Planet CNC can.
Planet CNC
http://www.youtube.com/watch?v=0jGY92S8bxM]CNC USB Controller - "Warp" - measuring and cutting warped toolpath - YouTube
I need to have some automatic compensation in my machine
Is posible somehing like this
I cannot find this posibility in other machine
Please look at this video :
Front panel samples, high speed machining*-*DATRON Dynamics
Any suggestion ?
Thanks in advance
Regards from Spain
Fernando Cittadini
Similar Threads:
Not in Mach3, but I think Planet CNC can.
Planet CNC
http://www.youtube.com/watch?v=0jGY92S8bxM]CNC USB Controller - "Warp" - measuring and cutting warped toolpath - YouTube
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry a lot ....
I think is very interesting
I continue searching and find this :
WarpDriver - Paul Rowntree
What you do think about ?
I use V Carve Pro and I prefer to implement with this software
Please give me your opinion
Thanks
Fernando Cittadini
I looked at Warpdriver before posting, but I don't think it can do what you want.
Paul is a member here, you might want to ask him .
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Fernando,
You can contact Alberto
Not sure if this will work for you. It has a probe and cut feature.
G-Code Ripper