Reply with QuoteMach will NOT run on NT4.
It only works on Win2K, XP and Vista.
Installing Mach on Winnt4.0
I have some difficulties with installing Mach on winnt 4.0
Near the end of the installation de Installer says disk full
Unable to write.....
When I skip these files the installer gets to the end but Mach does not start.
Ofcourse there is space enough on the machine.
I used different releases of Mach 3 .
Also updated Winnt4.0 with service pack 6 for NT.
Anybody familiar with this problem?
Similar Threads:
Mach will NOT run on NT4.
It only works on Win2K, XP and Vista.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
SureOriginally Posted by Oscar F1
Mach clearly states for Win 2000 or Win XP and also runs (?) on Vista..
No NT!
