Post all of your settings.
First off lets just pretend I dont know jack about CNC/Mach3 as I just started my journey! However I am no dummy haha
My issue is this, I have built my first machine which I use for pool cues (X/Y/Z/A-Spindle) I only run two profiles in Mach one for inlays (XYZA A being for indexing rotation) and a Tapering profile where A switches to a spindle job just to turn wood stock (no high RPM and yes I am using a stepper to spin) problem is I can't get the stepper to spin in tapering mode as a spindle. Everything works in the Inlay profile, and in tapering I can disengage the spindle and reactivate A and turn it with a hotkey fine. I have confirmed my settings with others that run the same setup and they all seem to match.
If you have any ideas please feel free to dumb them up a bit! Haha
Similar Threads:
Post all of your settings.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hummm won't let me attach an xml? so I will try screen shots of my applicable settings pages...
Also the only thing checked active on the input/output/encoder is e-stop
As I was told and shown by everyone that is correct for this simple setup?
I am running windows 10, smoothstepper, Xylotex
What does your g-code look like? Do you have an M3, and an S### in it?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Here is an exapmle of one of the runs for tapering...
M3 S800
M1
N1 G01 X1. Y0.0048 Z0. F4
N2 X2. Y0.0108
N3 X3. Y0.0190
N4 X4. Y0.0263
N5 X5. Y0.0360
N6 X6. Y0.0453
N7 X7. Y0.0543
N8 X8. Y0.0655
N9 X9. Y0.0773
N10 X10. Y0.0860
N11 X11. Y0.0973
N12 X12. Y0.1065
N13 X13. Y0.1140
N14 X14. Y0.1200
N15 X15. Y0.1263
N16 X16. Y0.1303
N17 X17. Y0.1340
N18 X18. Y0.1390
N19 X19. Y0.1425
N20 X20. Y0.1490
N21 X21. Y0.1540
N22 X22. Y0.1580
N23 X23. Y0.1590
N24 X24. Y0.1620
N25 X25. Y0.1645
N26 X26. Y0.1660
N27 X27. Y0.1670
N28 X28. Y0.1675
N29 X29. Y0.169
N30 X30.5 Y0.1735
M5
N31 Y-0.25
N32 X0. F120