You need a Mach3 plugin for your USB controller. If you don't have one, it won't work.
Hi Guys (and girls)
I have bought a 3040T CNC milling machine, and Mach3. My problem is, I cant get Mach3 to operate the machine through USB. Now i have read something, about mach3 having trouble with controlling the machine though USB, but it was not a very clear statement. so my firt question, is it possible to control the 3040T with mach3 trough USB. if so, what am forgetting, like a special driver (now i have planet CNC installed, and couldn't find a special one for mach3).
I am looking forward to your reply.
p.s. I am almost sure I am not the first one with this problem, but couldn't find an correct topic about it.
Similar Threads:
You need a Mach3 plugin for your USB controller. If you don't have one, it won't work.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
hi Ger21,
thanks for your fast reply.
they have like 7 plugins for what is seems like the usb issu. can you (or someone else) advise me about the correct one?
CNC-Robotica interface USB MACH3 Plugin
HyCNC-4P USB CNC interface
HyCNC-4L USB CNC interface
HyCNC-6L USB CNC interface
NX-USB - 4 Axes Motion Controller
UC100 USB Motion Controler
UC300-5LPT USB Motion controller
thank you in advance.
Cnc-Robotica Interface USB Mach3 Plugin