Need Help! How to calibrate table?


Results 1 to 3 of 3

Thread: How to calibrate table?

  1. #1
    Registered
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default How to calibrate table?

    When I cut straith lines on X or Y the cut is fine ( nice cut no jageth edges ) but when I cut curves and angels my cut is very jaget almost like a saw tooth.
    How do I correct this?

    Similar Threads:


  2. #2

    Default Re: How to calibrate table?

    Try reducing your speed on the curved cuts and see if the problem goes away. It could be whip in the axis movements.



  3. #3
    Registered
    Join Date
    Apr 2014
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: How to calibrate table?

    Hi rat,
    Think it must be your drawings on dxf try a different resolution .



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to calibrate table?

How to calibrate table?