Reply with QuoteYou won't really gain anything.
The requirement for a dedicated graphics card was for PC's from 12-15 years ago. Back then, many PC's with integrated graphics would not run Mach3 at all.
Mach3--What role does the non-integrated graphics card play?
I see that MACH3 recommends an external graphics card of 512MB or 1GB for 3D programs. Wondering how Mach3 uses the graphics card. I've been running on Windows XP on the internal graphics card and wondering what I can gain by going external.
Thanks.
Similar Threads:
- Problem- Graphics Card
- Need Help!- graphics card
- Which Graphics Card?
- Graphics Card & X4
- Graphics Card
Re: Mach3--What role does the non-integrated graphics card play?
You won't really gain anything.
The requirement for a dedicated graphics card was for PC's from 12-15 years ago. Back then, many PC's with integrated graphics would not run Mach3 at all.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
