You can have mach3 stop it, but you need an M3 in your g-code to start it. I put an M5 in the g-code to stop it as well.
What is the best way to automatically stop the spindle on tool change and start when the user hits the Cycle Start button?
Does Mach3 has the ability to achieve this or the does the user need to add M3 and M5 manually to g-code files?
Similar Threads:
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
You can have mach3 stop it, but you need an M3 in your g-code to start it. I put an M5 in the g-code to stop it as well.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby
Found it.
Suat
Proud father, C# developer, Model heli pilot, newbie free time machinist for hobby