Need Help! Jogging Step - first step after continuous too big


Results 1 to 2 of 2

Thread: Jogging Step - first step after continuous too big

  1. #1
    Registered
    Join Date
    May 2015
    Location
    New Zealand
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Jogging Step - first step after continuous too big

    Hi everyone

    I have a problem. I have had to build a new Mach3 pc (XP was locking up) and now when I use my XBox controller to jog the first step is about 15 times what it should be.

    I have step set to 0.05mm but the first step after a continuous jog is about 0.7mm.

    Any ideas?

    Regards

    Bruce

    Similar Threads:
    Last edited by bruedney; 06-02-2017 at 05:06 PM.


  2. #2
    Registered
    Join Date
    May 2015
    Location
    New Zealand
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Jogging Step - first step after continuous too big

    Found it

    Joypad plugin 2.0.1 was causing this. reverted to 2.0 and problem solved



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Jogging Step - first step after continuous too big

Jogging Step - first step after continuous too big